Filter
Top Products
WL-500W Wireless Router User Manual
24
2) Setting up FTP site
WL-500W can also serve as an FTP site. You can make your FTP site accessible to
all users, or set up an access policy to restrict anonymous login. To use this feature,
you need to plug a USB storage disk to the USB2.0 port on the rear panel of WL-
500W. Make sure the hard disk is formatted and partitioned properly.
1. To allow anonymous login: Set
Network Neighborhood Mode
to
Share all partitions in disk
,
FTP Mode to
Login to first
partition
. The anonymous
login directory is the root
directory of rst partition.
To allow account login only: Set
Network Neighborhood Mode
to
Apply rules in shared node
list
, FTP Mode to
Login to
first matched shared node
.
Click
Add
in the Share Node List
to specify the access directory
and access right of FTP account.
2. The
Maximum Login User
field specifies the maximum
number of concurrent users.
The default value is 6.
3. Click
Finish
to activate the
settings and reboot. This process
may take several minutes.
4. Type
ftp://192.168.1.1
into
the address box of your Web
browser and press Enter to
login the FTP site.