Filter
Top Products
AX-112 Analog Telephone Adapter 23
Chapter 4 - Operation
English
4.2 Call service features
AX-112 has a set of pre-dened service dial code for using the functions such
as conditional forwarding, call return, and PSTN mode switch. Refer to the
table for the functions’ description and usage.
FUNCTION PRESS
KEY
(Default)
USAGE
Conditional Call Forwarding *70# Enter the forwarding phone number right
after *70#, you will hear 3 short tone as
conrm.
Call Forward On *72# Same as above
Call Forward Off #72# 3 short tone will be played as conrm
Do Not Disturb On *74# Same as above. Will reject all incoming
call.
Do Not Disturb Off #74# 3 short tone will be played as conrm
Call Transfer *98# Enter the destination phone number
right after *98#, and hang up phone after
hearing 3 short tone will transfer the call
(blind transfer).
Call Return *69# Auto redial the previous one missed
incoming call.
Speed Dial *68n There are 8 speed dial number entries
on web GUI, you have to predene
the phone number in each eld for
this function. The value ‘n’ indicates
the relative number of speed dial eld
number from 1 to 8.
The relative setting elds on the web can not be left blank. You have to predene
all the call service command in the web GUI in advance, or use the default setting,
before using service functions.
ASUS recommends that you change the service code values only if you have meet
conict with the setting of your service provider.