Filter
Top Products
34 ASUS CUBX-L/CUBX-E User’s Manual
Connectors
3. H/W SETUP
3. HARDWARE SETUP
9) Wake-On-LAN Connector (3-pin WOL_CON)
This connector connects to a LAN card with a Wake-On-LAN output, such as the
ASUS PCI-L101 Ethernet card (see 7. APPENDIX). The connector powers up
the system when a wakeup packet or signal is received through the LAN card.
IMPORTANT: This feature requires that Wake-On-LAN features are enabled
(see 4.5.1 Power Up Control) and that your system has an ATX power supply
with at least 720mA +5V standby power.
CUBX-L/CUBX-E Wake-On-LAN Connector
+5VSB
PME
Ground
WOL_CON
®
10) Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card. NOTE: For external modems, Wake-On-Ring
is detected through the COM port.
IMPORTANT: This feature requires that Wake-On-Ring features are enabled
(see 4.5.1 Power Up Control) and that your system has an ATX power supply
with at least 720mA +5V standby power.
CUBX-L/CUBX-E Wake-On-Ring Connector
WOR
PIXRI#
Ground
2
1
®