Filter
Top Products
75
5. SOFTWARE SETUP
ASUS CUBX-L/CUBX-E User’s Manual
5. S/W SETUP
Windows 98
5. SOFTWARE SETUP
5.1 Install Operating System
You should always use the latest operating system and updates when using new
hardware to ensure full compliancy. You may use any version of Windows 98, but
for Windows 95, you must use OSR 2.0 or later. For Windows NT 4.0, you must use
Service Pack 3.0 or later.
5.2 Start Windows
When you start Windows 98 for the first time after installing your motherboard,
Windows will detect all plug-and play devices. Follow the Add New Hardware Wiz-
ard to install all necessary device drivers. When prompted to restart, select No and
then follow the setup procedures in this section.
NOTE: Because there are various motherboard settings, options, and expansion
cards, the following can only be used as a general reference and may not be an exact
reflection of your system.
5.3 Installing Drivers and Software
5.3.1 PCI RAID Controller Found
(only on model with onboard ATA100 IDE controller)
Insert the provided floppy disk into your floppy disk drive.
5. S/W SETUP
Windows 98
(1) Click here.
(2) Click here.
(3) Select Floppy disk
drives and then
click here.
Follow the online instructions to finish installation.