Filter
Top Products
22
ASUS CUV4X-DLS User’s Manual
CUV4X-DLS SCSI Setting
®
CUV4X-DLS
Enable
(Default)
Disable
12
2
3
SCSI_EN
®
CUV4X-DLS
CUV4X-DLS USB Device Wake-Up
USBPWR1
Disable
(Default)
Enable
1
2
2
3
USBPWR2
Disable
(Default)
Enable
1
2
2
3
6) SCSI Setting Jumper (3-pin SCSI_EN)
This jumper allows you to enable or disable the SCSI feature on the motherboard.
The default setting is ENABLE.
7) USB Device Wake-up Jumpers (3-pin USBPWR1, USBPWR2)
These jumpers allow you to enable or disable the USB feature on the motherboard.
Set to ENABLE if you wish to use the USB devices to wake up the computer.
This feature requires an ATX power supply that can supply at least 2A on the
+5VSB lead. The default setting for both USBPWR1 and USBPWR2 is
DISABLE.
NOTES:
1. Before setting either of these jumpers to ENABLE, make sure that you have
the appropriate power supply, otherwise the computer does not power up.
2. The total current consumed must NOT exceed the power supply capability
(+5VSB) whether under normal working conditions or in sleep mode.
3. H/W SETUP
Motherboard Settings
3. HARDWARE SETUP