Asus DSEB-D16 Computer Hardware User Manual


 
5-12 Chapter 5: RAID conguration
Press <F10> again, the logical drive information appears including a
Logical
Drive
menu that allows you to change the logical drive parameters.
6. Select
RAID
from the
Logical Drive
menu, then press <Enter>.
7. Select
RAID 10
from the menu, then press <Enter>.
You need at least four identical hard disk drives when creating a RAID 10 set.
8. Select
DWC
from the
Logical Drive
menu, then press <Enter>.
9. Select
On
to enable the
Disk Write Cache
setting, then press <Enter>.
LSI Logic Software RAID Conguration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
PORT #
DNLIN A00-00
DNLIN A00-01
0
1
Easy Conguration - ARRAY SELECTION MENU
Logical Drive(s) Congured
LD RAID Size #Stripes StripSz Status
0 0 308988MB 4 64 KB ONLINE
Logical Drive 0
RAID = 0
Size = 308988MB
DWC = Off
RA = On
Accept
SPAN = NO
Choose RAID Level For This VD
RAID = 0
RAID 5
RAID 10
RAID Level
LSI Logic Software RAID Conguration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Congure
Initialize
Objects
Rebuild
Check Consistency
PORT #
DNLIN A00-00
DNLIN A00-01
ONLIN A00-03
0
1
Easy Conguration - ARRAY SELECTION MENU
Logical Drive(s) Congured
LD RAID Size #Stripes StripSz Status
0 10 308988MB 4 64 KB ONLINE
Logical Drive 0
RAID = 1
Size = 154494MB
DWC = Off
RA = On
Accept
SPAN = NO
Disk Write Cache Setting Of VD
Change DWC
Off
On