Asus E45M1-I Deluxe Computer Hardware User Manual


 
ASUS E45M1-I DELUXE1-12
3. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
The S/PDIF module is purchased separately.
Do not forget to connect the fan cables to the fan connectors. Insufcient air ow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
2. CPU and chassis fan connectors (3-pin CPU_FAN, 3-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power.
Only the CPU_FAN connector supports the ASUS Q-Fan feature.
E35M1-I DELUXE
E45M1-I DELUXE Fan connectors
CHA_FAN
CPU_FAN
Rotation
+12V
GND
Rotation
+12V
GND
E35M1-I DELUXE
E45M1-I DELUXE Digital audio connector
SPDIF_OUT
+5V
SPDIFOUT
GND