3-14
Chapter 3: BIOS setup
Chapter 3
MISC
MRC Fast Boot [Auto]
Allows you to enable, disable or automatically set the MRC fast boot. Conguration
options: [Auto] [Enable] [Disable]
DRAM CLK Period [Auto]
Conguration options: [Auto] [1] – [14]
Channel A DIMM Control [Enable Bot...]
Conguration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Channel B DIMM Control [Enable Bot...]
Conguration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Scrambler Setting [Optimized ...]
Allows you to set the optimized setting for stability. Conguration options: [Optimized
(ASUS] [Default (MRC)]
DIGI+ VRM
CPU Load-Line Calibration [Auto]
Load-line is dened by Intel VRM specication and affects CPU voltage. The CPU
working voltage will decrease proportionally to CPU loading. Higher value gets a
higher voltage and better overclocking performance, but increases the CPU and VRM
thermal conditions. This item allows you to adjust the voltage range from the following
percentages to boost the system performance: 0% (Regular), 25% (Medium), 50%
(High), 75% (Ultra High), and 100% (Extreme). Conguration options: [Auto] [Regular]
[Medium] [High] [Ultra High] [Extreme]
The actual performance boost may vary depending on your CPU specication.
CPU Fixed Frequency [XXX]
This item allows you to set a xed CPU frequency. Use the <+> or <-> keys to adjust
the value. The values range from 200kHz to 350kHz with a 50kHz interval.
CPU Power Phase Control [Auto]
Allows you to set the power phase based on the CPU. Conguration options: [Auto]
[Standard] [Optimized] [Extreme] [Manual Adjustment]
DO NOT remove the thermal module when setting this item to [Extreme] and [Manual
Adjustment]. The thermal conditions should be monitored.
This following item appears only when you set the CPU Power Phase Control item to
[Manual Adjustment].
Manual Adjustment [Fast]
Allows you to set a response for the CPU power phase control.
Conguration options: [Ultra Fast] [Fast] [Medium] [Regular]