ASUS HX97 User’s Manual 13
III. INSTALLATION
Jumper Settings
1. Flash ROM Boot Block Programming (BBLKW)
This sets the operation mode of the boot block area of the Programmable Flash
ROM to allow programming in the Enabled position. This is required only if
prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE.
Programming BBLKW
Disabled [1-2] (Default)
Enabled [2-3]
R
Boot Block Programming (Disable / Enable)
Disabled / Protected
(Default)
Enabled
1
2
3
BBLKW
1
2
3
BBLKW
(Jumpers)
III. INSTALLATION