Filter
Top Products
Disassembly Procedure
V1.0
2 - 7
ODD Module
The illustrations below show how to remove the ODD Module.
Remove the ODD Module
1. Remove 1 screw on the top case and turn over the device to pull out the ODD.
BACK
Top Case Module
The illustrations below show how to remove and disassemble the Top Case Module.
Remove the Top Case
1. Remove 6 screws on the top case and disconnect the power board FPC/touchpad FPC.
Then remove 20 screws on the bottom case.
O D D
T O P C A S E