Asus K7V Computer Hardware User Manual


 
ASUS K7V Users Manual 21
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
6) Voltage Regulator Output Setting (VID1, VID2, VID3)
This jumpers allow you to manually adjust the CPU core voltage. It is recom-
mended to use CPU Default as the CPU core voltage. CPU Default means the
Vcore is generated according to the CPU VID configuration. For each jumper
setting, there are two voltage options, depending on the CPU used.
01
01
01
K7V
®
K7V CPU Core Voltage
Selection
1.9/1.95Volts
1.8/1.85Volts
1.6/1.65Volts
1.4/1.45Volts 1.3/1.35olts
CPU Default/
JumperFree
(Default)
2/2.05Volts
1.5/1.55Volts
VID2
VID3
VID1
1.7/1.75Volts
VID2
VID3
VID1
VID2
VID3
VID1
3214 3214 3214
3214 3214 3214
3214 3214 3214
WARNING! Premature wearing of the processor may result when overclocking.
Be sure that the DIMM you use can handle the specified SDRAM MHz or else
bootup will not be possible.
External Frequency Table
CPU PCI Frequency Selection Switches
(MHz) (MHz) 1234
100.00 33.33 [ON] [ON] [OFF] [OFF]
103.00 34.33 [ON] [ON] [ON] [ON]
105.00 35 [OFF] [OFF] [OFF] [OFF]
110.00 36.67 [OFF] [OFF] [OFF] [ON]
NOTE: For updated processor settings, visit the ASUS web site (see ASUS CON-
TACT INFORMATION).