Asus K7V Computer Hardware User Manual


 
28 ASUS K7V Users Manual
3. HARDWARE SETUP
CPU
3. H/W SETUP
CPU fan cable to
fan connector
Lock hole
2. Push down firmly but gently the processor into the URM until it snaps into place.
NOTE: The processor edge fingers must be kept parallel to the connector or else
misalignment will occur.
Secure the assembly in place by pushing the two locks outward so that the locks
show through the retention mechanisms lock holes.
3.6.5 Removing the Processor
Push the two locks inward to disengage the latch feature and firmly lift the assembly
out of the URM.
Push lock inward
CPU fan cable to
fan connector
Locked Position
(push upward)
CAUTION! You may wear gloves to protect your hands from the sharp edges
when removing processors.