Asus M2N Computer Hardware User Manual


 
4-30 Chapter 4: BIOS setup
Power On By PS/2 KB/MS [Disabled]
Allows you to use specic keys on the keyboard or use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Conguration options: [Disabled] [Enabled]
Power On By USB[Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
USB device. This feature requires an ATX power supply that provides at least 1A
on the +5VSB lead. Conguration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set
to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC
Alarm Second appear with set values. Conguration options: [Disabled] [Enabled]
4.5.6 Hardware Monitor
Hardware Monitor
CPU Temperature [48ºC/118ºF]
MB Temperature [38ºC/100ºF]
CPU Fan Speed [5273RPM]
Chassis Fan Speed [N/A]
Power Fan Speed [N/A]
VCORE Voltage [ 1.320V]
3.3V Voltage [ 3.345V]
5V Voltage [ 5.094V]
12V Voltage [11.880V]
Smart Q-Fan Function [Enabled]
Fan Auto Mode Start Voltage [5.0V]
Fan Auto Mode Start Speed Temp [25ºC]
Fan Auto Mode Full Speed Temp [55ºC]
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. Select Ignored if you do not wish to display the detected
temperatures.
CPU / Chassis /Power Fan Speed (RPM)
[xxxxRPM] or [N/A] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU,
chassis, and power fan speed in rotations per minute (RPM). If the fan is not
connected to the motherboard, the eld shows N/A. Select Ignored if you do not
wish to display the detected speed.