Asus M2N-MX SE Computer Hardware User Manual


  Open as PDF
of 88
 
ASUS M2N-MX SE
2-21
Memory Conguration
Memory Setting: 333MHz-5.0-5-5-15-2T
Memclock Mode [Auto]
CAS Latency (CL) [Auto]
TRCD [Auto]
TRP [Auto]
TRAS [Auto]
Command Timing (2T mode) [Auto]
MCT Timing Mode [Auto]
Bank Interleaving [Disabled]
Enable Clock to ALL DIMMs [Disabled]
MemCLK Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Enabled]
Mem ory Controlle r
2.4.2 Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause the system to malfunction.
Memory Controller
Southbridge Conguration
Hyper Transport Conguration
Memory Controller
Memory Conguration
ECC Conguration
Power Down Control [Auto]
Memory Configuration
Memclock Mode [Auto]
Select the DRAM Frequency programming method. If Auto, the DRAM
speed will be based on SPDs. If Limit, the DRAM speed will not exceed
the specied value. If Manual, the DRAM specied will be programmed
regardless.
Conguration options: [Auto] [Limit] [Manual]
 previous next