Asus M2R32-MVP Computer Hardware User Manual


 
ASUS M2R32-MVPASUS M2R32-MVP
ASUS M2R32-MVPASUS M2R32-MVP
ASUS M2R32-MVP
2-292-29
2-292-29
2-29
For a fully-configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or
later version) and provides a minimum power of 400 W.
Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot up.
The ATX 12 V Specification 2.0 compliant (500 W) PSU has been
tested to support the below configuration:
CPU: AMD FX-62
Memory: 512 MB DDR (x4)
Graphics card: PCI Express x16 ATI X850
Hard disk: SATA HD (x2)
ATAPI: CD-ROM (x1)
Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
If you want to use the ATI CrossFire™ Graphics solution, use a PSU
with 500 ~ 600 W power to ensure system stability.
NEVER connect a
USB cable USB cable
USB cable USB cable
USB cable to the IEEE 1394a connector. Doing so
will damage the motherboard!
7.7.
7.7.
7.
IEEE 1394a connector (10-1 pin IE1394_2)IEEE 1394a connector (10-1 pin IE1394_2)
IEEE 1394a connector (10-1 pin IE1394_2)IEEE 1394a connector (10-1 pin IE1394_2)
IEEE 1394a connector (10-1 pin IE1394_2)
This connector is for the IEEE 1394a port. Connect the IEEE 1394a
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
M2R32-MVP
®
M2R32-MVP IEEE 1394 connector
IE1394_2
1
GND
+12V
TPB2-
GND
TPA2-
+12V
TPB2+
GND
TPA2+
The IEEE 1394a module cable is purchased separately.