Asus M2V890 Computer Hardware User Manual


 
5-17ASUS V-Series M2V890
5.4.3 Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
NorthBridge Co nfiguration
Advanced Chipset Settings
Warning: Setting wrong values in below sections
may cause system to malfunction.
Memory Controller
AGP Bridge K8M890 AGP/PCI EXPRESS Conguration
SouthBridge VIA VI8237A Conguration
Hyper Transport Conguration
Memory Controller
Memory Conguration
ECC Conguration
Power Down Control [Auto]
Alternate VID [0.850V]
Memory CLK :333 MHz
CAS Latency(Tcl) :5.0
RAS/CAS Delay(Trcd) :5 CLK
Min Active RAS(Tras) :15 CLK
Row Precharge Time(Trp) :5 CLK
RAS/RAS Delay(Trrd) :3 CLK
Row Cycle (Trc) :21 CLK
Asynchronous Latency :6 ns
Memory Conguration
Memclock Mode [Auto]
MCT Timing Mode [Auto]
Bank Interleaving [Auto]
Enable Clock to All DIMMs [Disabled]
MemClk Tristate C3/ATLVID [Disabled]
Memory Hole Remapping [Disabled]
Memory Configu ration
Memclock Mode [Auto]
Allows you to set the memory clock mode.Set by the code using [Auto]
or select [Manual] to set using one of the standard values.
Conguration options: [Auto] [Manual] [Limit]