Filter
Top Products
3-14
Chapter 3: BIOS setup
Chapter 3
CPU Power Duty Control [T.Probe]
[T.Probe] Maintains the VRM thermal balance.
[Extreme] Maintains the VRM current balance.
CPU Current Capability [Auto]
This item provides wider total power range for overclocking. A higher value brings a
wider total power range and extends the overclocking frequency range simultaneously.
Conguration options: [100%] [110%] [120%] [130%] [140%] [150%] [OCP Disable]
VRM Protection Threshold [Default]
This item allows you to set the VRM protection threshold over temperature protection.
Conguration options: [Default] [Higher]
CPU Power Thermal Control [130]
A higher temperature brings a wider CPU power thermal range and extends the
overclocking tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to
adjust the value. The values range from 130 to 151.
DO NOT remove the thermal module while changing the DIGI+ VRM related parameters.
The thermal conditions should be monitored.
DRAM Current Capability [100%]
Setting a higher value brings a wider total power range and extends the overclocking
frequency range simultaneously.
Conguration options: [100%] [110%] [120%] [130%]
DRAM Voltage Frequency [Auto]
This item allows you to adjust the DRAM switching frequency. Assign a xed high
DRAM frequency to increase O.C range or a lower DRAM frequency for better system
stability.
Conguration options: [Auto] [manual]
DRAM Fixed Frequency Mode
This item only appears when you set the DRAM Voltage Frequency to
[Manual]. It allows you to assign a xed high DRAM frequency to increase
the overclocking range or set to a low DRAM frequency for a better system
stability. The values range from 300KHz to 500KHz.