Filter
Top Products
3-24
Chapter 3: BIOS setup
Chapter 3
Max Cache Voltage [Disabled]
When Enabled, you can set the CPU Core Voltage to a value almost as high as the CPU
Input Voltage. Confuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode]
This allows you to set a very high CPU Core Voltage.
CPU Cache Voltage [Auto]
Congures the amount of Voltage fed to the UNCore of the processor including it is cache.
Increase when increasing CPU Cache Frequency. Use <+> or <-> key to adjust the value.
The values range from 1.050000V to 2.200000V at 0.003125V increment.
CPU Graphics Voltage [Auto]
Congures the amount of Voltage fed to the onboard graphics unit on the processor. Increase
when increasing IGPU Frequency. Use <+> or <-> key to adjust the value. The values range
from 0.800000V to 1.920000V at 0.001000V increment.
CPU System Agent Voltage [Auto]
Congures the amount of Voltage fed to the System Agent of the processor including it
is PCIE Controller and Power Control Unit. Increase when increasing DRAM Frequency.
Use <+> or <-> key to adjust the value. The values range from 0.850000V to 2.200000V at
0.003125V increment.
CPU Analog I/O Voltage [Auto]
Congures the amount of Voltage fed for the Analog portion of the I/O on the processor.
Increase when increasing DRAM Frequency. Use <+> or <-> key to adjust the value. The
values range from 1.050000V to 2.200000V at 0.003125V increment.
CPU Digital I/O Voltage [Auto]
Congures the amount of Voltage fed for the Digital portion of the I/O on the processor.
Increase when increasing DRAM Frequency. Use <+> or <-> key to adjust the value. The
values range from 1.000000V to 2.200000V at 0.003125V increment.
CPU Interfacing Voltage [Auto]
A reference voltage for transmission on the DMI path. Use <+> or <-> key to adjust the value.
The values range from 1.000000V to 1.600000V at 0.003125V increment.
SVID Support [Auto]
Disabling SVID Support stops the processor from communicating with the external Voltage
Regulator. Recommend disabling when overclocking. Conguration options: [Auto] [Enabled]
[Disabled]
Initial CPU Input Voltage [Auto]
Allows you to set the CPU Input Voltage. Use <+> or <-> key to adjust the value. The values
range from 0.800V to 2.440V at 0.010V increment.
Eventual CPU Input Voltage [Auto]
Allows you to set the Eventual CPU Input Voltage. Use <+> or <-> key to adjust the value.
The values range from 0.800V to 2.440V at 0.010V increment.