Filter
Top Products
2-42-4
2-42-4
2-4
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
6. Before installing the
motherboard into the chassis,
locate the standoffs that should
match the eight (8) CEK spring
screw holes.
4. Press the lower spring clips
inward, then insert to the lower
CPU heatsink holes until they
snap in place.
5. If you installed a second CPU,
repeat steps 2 to 4 to install the
CEK spring to the CPU2 heatsink
holes.
The CEK springs appear as
shown when installed.
Standoffs for CPU1Standoffs for CPU1
Standoffs for CPU1Standoffs for CPU1
Standoffs for CPU1
Standoffs for CPU2Standoffs for CPU2
Standoffs for CPU2Standoffs for CPU2
Standoffs for CPU2
CEK spring screw holeCEK spring screw hole
CEK spring screw holeCEK spring screw hole
CEK spring screw hole