![](http://pdfasset.owneriq.net/3/86/38636e1f-4903-4d04-b657-b9e63c19905f/38636e1f-4903-4d04-b657-b9e63c19905f-bg8c.png)
5-32
Chapter 5: Software support
FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc.
[ Select Drive for Rebuild ]
[ View Array Definition Menu ]
Array No RAID Mode Total Drv Status
Array 1 Mirror/Stripe 4 Critical
Stripe Block: Not Available Gigabyte Boundary: ON
Channel: ID Drive Model Capacity (MB)
3:Mas FUJITSU MPD3043AT 4325
[ Keys Available ]
[ ] Up [ ] Down [ESC] Exit [Enter] Select
[ ] Up [ ] Down [ESC] Exit [Enter] Select
7. Select the replacement drive. Press <Enter>.
FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc.
[ Keys Available ]
[ ] Up [ ] Down [ESC] Exit [Enter] Select
[ ] Up [ ] Down [ESC] Exit [Enter] Select
[ Rebuild Array Menu ]
Array No RAID Mode Total Drv Capacity Status
Array 1 Mirror/Stripe 4 7999 Critical
Array 2 ----- ----- ----- -----
Array 3 ----- ----- ----- -----
Array 4 ----- ----- ----- -----
8. Confirm the command to copy data from the intact source hard disk
onto a new replacement hard disk. A progress gauge displays the
copy progress for the duration of the task.
9. After the rebuild processis complete, the user is prompted to reboot the
system.
Controller Configuration (6): This command shows the default for
Controller Configuration. The default value is [Enabled].