Filter
Top Products
ASUS P4S533-E motherboard user guide
27
4. DDR Voltage Setting (4 pin DDRVOL1)
This jumper controls the voltage output to the DDR memory DRAMS.
Setting VDDR
2.9V [3-4]
2.7V [2-3]
2.5V [1-2] (default)
P4S533-E
®
P4S533-E DDRVOL Setting
DDRVOL1
2.5V 2.7V
12
2
3
2.9V
3
4
(Default)
P4S533-E
®
P4S533-E Bass Center Setting
(CENTER/BASS) (BASS/CENTER)
BCS1
BCS2
(Default)
12
23
BCS1
BCS2
5. Bass Center Setting (2x3 pin BCS1, BCS2)
Use these jumpers in conjunction with the C-Media PCI Audio Driver and
to adjust output for 4 or 6 speaker audio. No audio standard exists for
the three pick-up surfaces on male audio jacks, therefore it may be
necessary to switch jumpers from the default position, Bass/Center, to
Center/Bass, in order to reroute signals among the internal leads of the
Line-In, Line-Out, Mic female sockets. Make sure a test is made using
the Audio Driver software setup available on the Support CD.
CAUTION! It is advisable not to increase the voltage excessively to
prevent the memory system from being exposed to undue strain.