Filter
Top Products
ASUS P4S8X-MXASUS P4S8X-MX
ASUS P4S8X-MXASUS P4S8X-MX
ASUS P4S8X-MX
1-271-27
1-271-27
1-27
3.3.
3.3.
3.
Serial ATA connectors (7-pin SATA1, SATA2)Serial ATA connectors (7-pin SATA1, SATA2)
Serial ATA connectors (7-pin SATA1, SATA2)Serial ATA connectors (7-pin SATA1, SATA2)
Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives. The current Serial ATA interface allows up to 150
MB/s data transfer rate, faster than the standard parallel ATA with
133 MB/s (Ultra DMA/133)
Serial ATA Master/Slave connectorsSerial ATA Master/Slave connectors
Serial ATA Master/Slave connectorsSerial ATA Master/Slave connectors
Serial ATA Master/Slave connectors
ConnectorConnector
ConnectorConnector
Connector
SettingSetting
SettingSetting
Setting
UseUse
UseUse
Use
SATA1 Master Boot disk
SATA2 Slave Data disk
P4S8X-MX
P4S8X-MX SATA connectors
SATA2
SATA1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
• Install Windows
®
2000 Service Pack 4, Windows
®
XP Service Pack 1
or later versions before using the Serial ATA feature.
• The Serial ATA RAID feature (RAID 0, RAID 1, JBOD) is available only
if you’re using Windows
®
2000/XP or Windows
®
2003 Server
operating systems.
• Hot plug support for the Serial ATA drive and connectors are not
available in this motherboard.
• Make sure to install the SIS RAID drivers before using the Serial ATA
connectors.
If you install SATA hard disk drives, you can create a RAID 0, RAID 1, or
JBOD configuration with the SIS964 RAID controller. Refer to page 2-16
for the BIOS setting and page 3-18 for creating a RAID driver disk.