Asus P5A-VM Computer Hardware User Manual


 
ASUS P5A-VM User’s Manual 15
III. INSTALLATION
III. INST ALLATION
Jumpers
4. Voltage Input/Output Selection (VIO0, VIO1) /
5. Overclock Frequency Setting (OVER_FQ)
VIO0/VIO1 allow you to select the voltage supplied to the DRAM, chipset,
AGP, and the CPU’s I/O buffer. When enabled, OVER_FQ allows you to in-
crease the voltage supplied by 0.2V. This jumper is disabled by default.
P5A-VM Voltage Input/Output Selection / Overclock Frequency Settings
R
01
OVER_FQ
Enable
OVER_FQ
3.6Volts
VIO1
3.5Volts
3
2
1
3
2
1
Disable
4.0Volts
VIO0
3.8Volts
3
2
1
3
2
1
3. Keyboard Power (Wake) Up (KBPWR)
This allows you to disable or enable the keyboard power or wake up function. Set
to Enable if you want to use your keyboard (by pressing <Spacebar>) to power or
wake up your computer. The default is set to Disable because not all computers
have the appropriate ATX power supply.
P5A-VM Keyboard Power (Wake) Up
EnableDisable
(DEFAULT)
1
2
3
1
2
3
R
01
NOTE: This feature requires an ATX power supply that can
supply at least 300mA on the +5VSB lead and the new ACPI
BIOS support. Your computer will not function if you set this
to
Enable
and if you do not have the right ATX power supply.
WARNING! Overclocking may damage your CPU and cause your system to be
unstable. Use only the specified frequency of your CPU.