Filter
Top Products
5-285-28
5-285-28
5-28
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
5.5 Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows
®
2000/XP operating system on a hard disk drive that is included in a RAID
set.
To create a RAID driver disk:
1. Place the motherboard support CD in the optical drive.
2. When the
Drivers Drivers
Drivers Drivers
Drivers menu appears, select the RAID driver disk you wish
to create:
• Click
Make ITE8212 Driver Disk Make ITE8212 Driver Disk
Make ITE8212 Driver Disk Make ITE8212 Driver Disk
Make ITE8212 Driver Disk to create an ITE
®
8212F RAID
driver disk.
OrOr
OrOr
Or
Browse the contents of the support CD to locate the
driver disk
utility:
•
ITE8212 RAID Driver DiskITE8212 RAID Driver Disk
ITE8212 RAID Driver DiskITE8212 RAID Driver Disk
ITE8212 RAID Driver Disk:
\Drivers\ITE8212\MakeDisk
•
IntelIntel
IntelIntel
Intel
®
RAID Driver DiskRAID Driver Disk
RAID Driver DiskRAID Driver Disk
RAID Driver Disk:
\Drivers\Chipset\Intel\IAA\F6 Install Floppy\F6flpy32
3. Insert a formatted high-density floppy disk to the floppy disk drive.
4. Follow screen instructions to complete the process.
5. After creating a RAID driver disk, eject the floppy disk, then
write-protect it to prevent computer virus infection.
To install the RAID driver:
1. Install an operating system to the selected hard disk drive. During
installation, the computer prompts you to press the
F6F6
F6F6
F 6 key if you are
installing a third-party SCSI or RAID driver.
2. Press <F6>,
then insert the RAID driver disk to the floppy disk drive.
3. Follow screen instructions to install the RAID drivers.
Refer to section “5.2.2 Drivers menu” for details.