Filter
Top Products
ASUS P5K64 WS 5-39
5.5 Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows
®
XP
operating system on a hard disk drive that is included in a RAID set. For
Windows
®
Vista operating system, use either a oppy disk or a USB device with
the RAID driver.
5.5.1 Creating a RAID driver disk without entering the OS
To create a RAID/SATA driver disk without entering the OS:
1. Boot your computer.
2. Press <Del> during POST to enter the BIOS setup utility.
3. Set the optical drive as the primary boot device.
4. Insert the support DVD into the optical drive.
5. Save changes and exit BIOS.
6. Press any key when the system prompts “Press any key to boot from the
optical drive.”
7. When the menu appears, press <1> to create a RAID driver disk.
8. Insert a formatted oppy disk into the oppy drive then press <Enter>.
9. Follow succeeding screen instructions to complete the process.
5.5.2 Creating a RAID/SATA driver disk in Windows
®
To create a RAID driver disk in Windows
®
environment:
1. Start Windows
®
.
2. Place the motherboard support DVD into the optical drive.
3. Go to the
Make Disk
menu, then select the RAID driver disk you wish to
create:
• Click
Make Intel ICH9R AHCI/RAID 32bit Driver
to create an Intel
®
ICH9R RAID driver disk for a 32-bit system.
•
Click
Make Intel ICH9R AHCI/RAID 64bit Driver
to create an Intel
®
ICH9R RAID driver disk for a 64-bit system.
• Click
Make Marvell 61xx PATA/eSATA Driver
to create a Marvell
®
88SE61xx SATA RAID driver disk.
4. Insert a oppy disk/USB device into the oppy disk drive/USB port.
5. Follow succeeding screen instructions to complete the process.
Write-protect the oppy disk to avoid computer virus infection.