Asus P5N-E SLI Computer Hardware User Manual


 
ASUS P5N-E SLI 1-31
3. Serial ATA connectors (7-pin SATA1 [red], SATA2 [black],
SATA3 [red], SATA4 [black])
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk and optical disk drives.
These connectors are Disabled by default. If you intend to create
a Serial ATA RAID set using these connectors, enable the First,
Second, Third or Fourth SATA Master RAID items in Advanced >
Onboard Devices Configuration > NVRAID Configuration
of the BIOS. See section “2.4.6 Onboard Devices Conguration” on
page 2-30 for details.
These connectors support Native Command Queuing (NCQ), Power
Management (PM) Implementation Algorithm, Hot Swap and smart setup.
4. Audio connectors (4-pin CD)
These connectors allow you to receive stereo audio input from sound
sources such as a CD-ROM, TV-tuner, or MPEG card.
P5N-E SLI
R
P5N-E SLI
SATA Connectors
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXP4
RSATA_RXN4
GND
SATA4
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXP3
RSATA_RXN3
GND
SATA3
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA2
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
SATA1
P5N-E SLI
R
P5N-E SLI Internal Audio Connector
CD
(black)
Right Audio Channel
Left Audio Channel
Ground
Ground