Asus P8B75-M Computer Hardware User Manual


  Open as PDF
of 76
 
2-14 ASUS P8B75-M
Long Duration Maintained [Auto]
Allows you to maintain the turbo ratio’s long duration power.
Use the <+> and <-> keys to adjust the value.
Short Duration Power Limit [Auto]
Allows you to limit the turbo ratio’s long duration power.
Use the <+> and <-> keys to adjust the value.
Primary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for CPU cores
Use <+> and <-> key to adjust the value at 0.125A increment. . .
Secondary Plane Current Limit [Auto]
Maximum instantaneous current allowed at any given time for Internal Graphics cores.instantaneous current allowed at any given time for Internal Graphics cores. current allowed at any given time for Internal Graphics cores.
Use <+> and <-> key to adjust the value at 0.125A increment.
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the
value. To restore the default setting, type [auto] using the keyboard and press the <Enter>
key.
2.4.7 Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Offset Voltage [Auto]
Allows you to set the CPU Offset voltage. The values range from 0.005V to 0.635V with a 0.005V
interval.
Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage
may damage the CPU permanently, and setting a low voltage may make the system
unstable.
2.4.8 DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.20V to 2.13V with a 0.01V
interval.
According to Intel CPU specication, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend you install the DIMMs with the voltage
requirement below 1.65V.
2.4.9 VCCIO Voltage [Auto]
Allows you to set the VCCIO voltage. Conguration options: [Auto] [+0.10V]
2.4.10 VCCSA Voltage [Auto]
Allows you to set the VCCSA voltage. Conguration options: [Auto] [+0.05V]
2.4.11 CPU PLL Voltage [Auto]
Allows you to set the CPU and PCH PLL voltage. Conguration options: [Auto] [+0.10V]
 previous next