Asus P8B75-M Computer Hardware User Manual


 
2-18 ASUS P8B75-M
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Conguration options: [Enabled] [Disabled]
Hot Plug [Disabled]
This item only appears when you set the SATA Mode Selection item to [AHCI] and allows you
to enable or disable the hot-plug support for each SATA port. Conguration options: [Enabled]
[Disabled]
2.5.5 System Agent Conguration
Memory Remap Feature [Enabled]
[Enabled] Allow you to enable remapping the memory above 4GB.
[Disabled] Disables this function.
Graphics Conguration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device. Conguration
options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the iGPU.
Conguration options: [32M] [64M] [96M] [128M] ~ [416M] [448M] [480M] [512M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU power use
when idle. Conguration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Enabled]
Allows you to enable the iGPU Multi-Monitor. For Lucid Virtu MVP function support, set this item to
[Enabled] to empower both integrated and discrete graphics. iGPU shared system memory size is
xed in 64MB. Conguration options: [Disabled] [Enabled]
NB PCIe Conguration
Allows you to congure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to congure the PCIE x16_1 speed. Conguration options: [Auto] [Gen1] [Gen2]
2.5.6 ME Subsystem
The items in this menu allow you to change the Intel
®
Management Engine (ME) feature.
ME Subsystem [Enabled]
Allows you to enable or disable accessing the ME subsystem. Conguration options:
[Enabled] [Disabled]
End of Post Message [Enabled]
This item appears only when you set the ME Subsystem item to [Enabled]. Conguration
options: [Enabled] [Disabled]
Execute MEBx [Enabled]
Allows you to enable or disable the Intel
®
Management Engine BIOS Extension (MEBx)
feature. Conguration options: [Enabled] [Disabled]