Filter
Top Products
ASUS P8C WS
3-9
Chapter 3
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking conguration options:
[Auto] Loads the optimal settings for the system.
[X.M.P.] If you install memory modules supporting the eXtreme Memory Prole
(X.M.P.) Technology, choose this item to set the proles supported by your
memory modules for optimizing the system performance.
The item X.M.P. appears only when you set the Ai Overclocking Tuner to [Manual].
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The conguration options vary with the
BCLK/PEG Frequency item settings.
Conguration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz]
[DDR3-1400MHz] [DDR3-1600MHz]
Selecting a very high memory frequency may cause the system to become unstable! If this
happens, revert to the default setting.
iGPU Max. Frequency [Auto]
Use the <+> and <-> keys to adjust the value. The minimum frequency vary depending on
the type of CPU installed.
Conguration options: [Auto] [depending on CPU] [3000MHz]
iGPU Max. Frequency is available only when you install a desktop processor that supports
onboard graphics to the motherboard and there is no other VGA cards installed on the
motherboard.
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Conguration options: [Disabled] [Enabled]
GPU Boost
GPU Boost accelerates the integrated GPU for extreme graphics performance. Conguration
options: [Ok] [Cancel]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.