Asus P8Z68-V PRO/GEN3 Computer Hardware User Manual


 
ASUS P8Z68-V PRO/GEN3
2-23
Chapter 2
3. Marvell
®
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [navy blue])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is
not supported.
You must install Windows
®
XP Service Pack 3 or later versions before using Serial ATA
hard disk drives.
When using NCQ, set the
Marvell Storage Controller
item in the BIOS to [Enabled].
Refer to section
3.5.6 Onboard Devices Conguration
for details.
4. USB 3.0 connector (20-1 pin USB3_34)
These connectors are for the additional USB 3.0 ports, and complies with the USB 3.0
specicaton that supports up to 480 MBps connection speed. If the USB 3.0 front panel
cable is available from your system chassis, with this USB 3.0 connector, you can have
a front panel USB 3.0 solution.
You can connect the ASUS front panel USB 3.0 bracket to this connector to obtain the front
panel USB 3.0 solution.