Filter
Top Products
3-20
Chapter 3: BIOS setup
Chapter 3
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST.
Conguration options: [Enabled] [Disabled]
Hot Plug [Disabled]
These items appear only when you set the SATA mode item to [AHCI Mode] or [RAID Mode],
and allow you to enable/disable SATA Hot Plug Support.
Conguration options: [Disabled] [Enabled]
3.5.4 System Agent Conguration
Memory Remap Feature [Enabled]
[Enabled] Allow you to enable remapping the memory above 4GB.
[Disabled] Disables this function.
Graphics Conguration
Primary Display [Auto]
Allows you to select a primary display from IGFX, PEG, or PCI graphic devices, or
select SG for switchable GFX.
Conguration options: [Auto] [IGFX] [PEG]
iGPU Memory [32M]
This item select DVMT 5.0 pre-allocated graphic memory size, used by the internal
graphic device.
Conguration options: [32M] [64M] [96M]~[1024M]
Render Standby [Enabled]
Allows you to enabled or disabled render standby support.
Conguration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Enabled]
Allows you to enable the iGPU Multi-Monitor. For Lucid Virtu MVP function supports,
set this item to [Enabled] to empower both integrated and discrete graphics. iGPU
shared system memory size is xed in 64MB
Conguration options: [Disabled] [Enabled]