Filter
Top Products
4-46 Chapter 4: Software support
EZ Backup
To start EZ Backup conguration:
1. Click EZ Backup from the main screen.
2. Check if the SATA cables and
power cords are installed properly.
Click Next to continue.
3. Click Next to continue the
conguration.
4. All original data on the hard
drive connected to the SATA_
E2 (white, port 1) connector on
the motherboard will be erased.
Make necessary backup before
proceeding. Click Next to
continue.
5. The setup is completed. Click
OK to close the conguration
window.