Filter
Top Products
5-18
Chapter 5: OS Installation
5.4 Novell
®
NetWare
®
Server
5.4.1 LSI
®
SCSI Driver Installation
A single driver (*HAM) is provided for the Novell NetWare 4.XX, and 5.X
environments. This document explains how to install and use the SDMS
NWPA SCSI Host Adapter Module (HAM) driver for NetWare. The SDMS
NWPA solution consists of the device drivers, LSI_U3NW.DDI.and
LSI_U3NW.HAM are NWPA Host Adapter Modules (HAMs). In order to
support SCSI devices, load the HAM in conjunction with a SCSI Custom
Device Module (CDM). Novell has developed generic CDMs to support
SCSI-2 hard drives, SCSI CD-ROM devices, SCSI Magneto Optical
devices, SCSI tape devices, and SCSI changer devices. In addition, third
party vendors are developing CDMs to support their specific devices. In
the following, the NetWare 5.x, 4.xx installation procedure are listed for
reference.
1. Use the self-extracting image files.
For the LSI_U3.SYS driver, the executable file is located here:
\Drivers\Sdms\Diskimag\Netware.exe
2. Use the manual to create driver disk.
A. Preparing an LSI Driver disk
The SDMS™ NWPA drivers for the Novell NetWare operating system are
located on the ASUS Driver Support CD at:
\Drivers\Sdms\Drivers\NetWare\
Copy all the drivers into a diskette and it will be used for the NetWare
system installation. Label it “LSI driver for NetWare”.