Filter
Top Products
11
Chapter 2: Setting up the hardware RT-N12 B1
LAN1
LAN2
LAN3
LAN4
Internet
Modem
RT-N12 B1
Client
2. Connect your devices.
Setting up the wireless router in Router mode
In the Router mode, the wireless router connects to the Internet via PPPoE,
Automatic IP, PPTP, L2TP, or Static IP, and provides you with wireless radio
signals. The NAT, rewall, and IP sharing services for LAN clients are enabled.
To set up the wireless router in Router mode:
1. Choose the Router mode.
Router AP
Repeater
RT-N12 B1
LAN1
LAN2
LAN3 LAN4 Internet
Note: We recommend that you use an Ethernet cable (wired connection) to connect your
computer to the wireless router for initial conguration to avoid possible setup problems due to
wireless uncertainty.