Filter
Top Products
36
VivoPC Barebone
8. Attach each of the four black screws with rubber head assembly
into the screw holes of the HDD as shown.
9. PositiontheSerialATAHDDontopofthedrivebaytoan
orientation where the HDD’s SATA connectors are aligned to the
SATA connector in the VivoPC drive bay.
10. Match the rubber heads with the four screw slots on the drive
bay.
11. Carefully, place the Serial ATA HDD into the drive bay, then slide
the drive towards the SATA connector.
SATA connector
rubber head
rubber head
screw slot
black screw