Filter
Top Products
Chapter 2: Basic installationChapter 2: Basic installation
Chapter 2: Basic installationChapter 2: Basic installation
Chapter 2: Basic installation
2-82-8
2-82-8
2-8
7. Connect a 4-pin power plug
from the power supply unit to
the power connector at the
back of the drive.
5. Re-install the HDD cage to the
chassis. Slide in the HDD cage
to the bay assembly rails.
6. Carefully push the HDD cage
in the direction of the arrow
until it snaps to indicate that
it is secured to the chassis.
Refer to the motherboard user guide before connecting an IDE cable to
the hard disk drive.
6. Connect a 40-pin IDE cable to
the IDE connector at the back
of the drive.
5
6