Filter
Top Products
2-92-9
2-92-9
2-9
ASUS VENTO 3600ASUS VENTO 3600
ASUS VENTO 3600ASUS VENTO 3600
ASUS VENTO 3600
To install a
Serial ATA Serial ATA
Serial ATA Serial ATA
Serial ATA hard disk drive:
1. Follow steps 1 to 5 of the previous section.
2. Connect one end of the 7-pin
SATA cable to the SATA
connector at the back of the
drive then connect the other
end to a SATA connector on
the motherboard. Refer to
the motherboard
documentation for the
location of the SATA
connectors
Serial ATA power cableSerial ATA power cable
Serial ATA power cableSerial ATA power cable
Serial ATA power cable
4-pin (male)4-pin (male)
4-pin (male)4-pin (male)
4-pin (male)
15-pin15-pin
15-pin15-pin
15-pin
2.5.22.5.2
2.5.22.5.2
2.5.2
Installing a SATA hard disk driveInstalling a SATA hard disk drive
Installing a SATA hard disk driveInstalling a SATA hard disk drive
Installing a SATA hard disk drive
3. For Serial ATA HDDs with a 4-
pin power connector:
Connect a 4-pin (female)
power plug from the power
supply unit (PSU) to the 4-pin
(male) power connector at the
back of the drive.
For Serial ATA HDDs without a
4-pin power connector:
Use a SATA power cable.
Connect a 4-pin plug (female)
from the PSU to the 4-pin
(male) plug of the SATA
power cable. Connect the
15-pin SATA power plug to
the power connector at the
back of the drive.