Filter
Top Products
1-20
Chapter 1: Product introduction
6 IEEE 1394 connector (10-1 pin IE1394_1)
This orange connector is for the IEEE 1394 module. Attach the 10-1 pin cable plugs to
these connectors. You may also connect a 1394-compliant internal hard disk to this
connector.
5. CPU and Chassis Fan Connectors (3-pin CPUFAN1, CHA_FAN1)
The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total
of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors
on the motherboard, making sure that the black wire of each cable matches the
ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air
flow within the system may damage the motherboard components. These are not
jumpers! DO NOT place jumper caps on the fan connectors!
K8V-F
®
K8V-F 12-Volt Fan Connectors
CPU_FAN
CHA_FAN
GND
Rotation
+12V
GND
Rotation
+12V
DO NOT connect a USB cable to to the IEEE 1394 connector. Doing so will
damage the motherboard!
®
K8V-F IEEE-1394 Connector
IE1394_1
1
TPA0-
GND
TPB0-
+12V
GND
TPA0+
GND
TPB0+
+12V
The IEEE 1394 port module is purchased separately.