Filter
Top Products
2-20
Chapter 2: BIOS information
USB 1.1 Ports Configuration [USB 8 Ports]
This item allows you to set the number of USB ports to activate.
Configuration options: [Disabled] [USB 2 Ports] [USB 4 Ports] [USB 6 Ports]
[USB 8 Ports]
USB 2.0 Controller [Enabled]
This option allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
Legacy USB Support [Auto]
This item allows you to enable or disable support for legacy USB devices. Setting
to Auto allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is detected,
the legacy USB support is disabled. Configuration options: [Auto] [Disabled]
[Enabled]
USB 2.0 Controller Mode [HiSpeed]
This option allows you to configure the USB 2.0 controller to HiSpeed (480Mbps)
or FullSpeed (12Mbps). Configuration options: [HiSpeed] [FullSpeed]