Filter
Top Products
WL-500gP Wireless Router User Manual
23
2) Setting up FTP site
WL-500gP can also serve as an FTP site. You can make your FTP site accessible by
all users, or set up access policy to restrict anonymous login. To use this feature, you
need to plug a USB storage disk to the USB2.0 port on the rear panel of WL-500gP.
Make sure the hard disk is formated and partitioned properly.
1. To allow anonymous login: Set
Network Neighbourhood Mode
to
Share all paritions in disk
,
FTP Mode to
Login to first
partition
. The anonymous login
directory is the root directory of
first partition.
To allow accout login only: Set
Network Neighbourhood Mode
to
Apply rules in shared node
list
, FTP Mode to
Login to
first mached shared node
.
Click
Add
in the Share Node List
to specify the access directory
and access right of FTP account.
2. The
Maximum Login User
field specifies the maximum
logged in users at a same time.
The default value is 6.
3. Click
Finish
to activate the
settings and reboot. This process
may take several minutes.
4. Type
ftp://192.168.1.1
into
the address box of your Web
browser and press Enter to
login the FTP site.