Filter
Top Products
3-28
Chapter 3: BIOS setup
Chapter 3
Total Adaptive Mode CPU Cache Voltage [Auto]
This item sums up the voltages of the CPU Cache Voltage offset and Additional Turbo
Mode CPU Cache Voltage options.
CPU System Agent Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU System Agent Voltage Offset [Auto]
This item allows you to set the amount of voltage fed to the system agent of the CPU
including its PCIE controller and the PCU (power control unit). Increase the voltage to
enhance the overclocking capability.
You can use the <+> or <-> keys to adjust the value. The values range from 0.001 V to
0.999 V with a 0.001 V interval.
CPU Analog I/O Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Analog I/O Voltage Offset [Auto]
This item allows you to set the amount of voltage fed to the analog portion of the I/O on
the CPU. By default, this item takes the standard value of the installed CPU. Increase
the amount of voltage to enhance the overclocking capability.
You can use the <+> or <-> keys to adjust the value. The values range from 0.001 V to
0.999 V with a 0.001 V interval.
CPU Digital I/O Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Digital I/O Voltage Offset [Auto]
This item allows you to set the amount of voltage fed to the digital portion of the I/O
on the processor. By default, this item takes the standard value of the installed CPU.
Increase the amount of voltage to enhance the overclocking capability.
You can use the <+> or <-> keys to adjust the value. The values range from 0.001 V to
0.999 V with a 0.001 V interval.
SVID Support [Auto]
Set this item to [Enabled] when overclocking your system. Disabling this item stops the CPU
from communicating with the external voltage regulator.
Conguration options: [Auto] [Disabled] [Enabled]
The following item appears only when you set SVID Support to [Enabled].
SVID Voltage Override [Auto]
This item allows you to set the SVID Voltage override. By default, this item takes the
standard value of the installed CPU. You can use the <+> or <-> keys to adjust the
value. The values range from 0.001V to 2.440 V with a 0.001 V interval.