Filter
Top Products
4. OSD Operation
31
F5: SKP
This function enables you to easily skip backward or forward, switching the
KVM focus, from the currently active computer port to the previous or next
available one.
The selection of which computers are available for Skip mode switching is
made with the Scan/Skip mode setting under the F3 SET function
(see page 26).
When you are in Skip mode, press:
Note: When you skip ports, you only skip to the previous or next available
computer that is in the Scan/Skip mode selection (see page 27).
If a port has been selected for Scan/Skip mode, when the focus switches to
that port a left/right triangle symbol appears before its port ID display.
While Skip mode is in effect, the console will not function normally. You
must exit Skip mode in order to regain control of the console.
To exit Skip mode, press [Spacebar] or [Esc].
← To skip from the current port to the previous port in the list.
→ To skip from the current port to the next port in the list.
↑ To skip from the current port to the last port of the previous station in the
list.
↓ To skip from the current port to the first port of the next station in the list.
cl1008-1016.book Page 31 Thursday, January 20, 2011 5:24 PM