Filter
Top Products
Chapter 1. Introduction
30
4 Sensor
Ports
External sensors plug into these four RJ-11 ports. See
Environment Sensors, page 9, and Securing the Sensors,
page 36, for further information.
5 Reset
Switch
This switch is recessed and must be pushed with a thin object,
such as the end of a paper clip.
Press and release to reboot the device.
Press and hold for more that three seconds to reset the eco
PDU to its factory default settings
6 LAN Port The cable that connects the unit to the Internet, LAN, or WAN
plugs in here.
7 Door Sensor This 4-pin dry contact port is for a door sensor support – allows
the monitoring of rack mount enclosure door access to notify
users when a door has been opened. See Door Sensor, page 9,
for details.
No. Item Description