Filter
Top Products
eco PDU PE Series User Manual
5
Features
Power Distribution
Space saving 0U rack mount design with rear mounting
Various IEC outlet models
2 digit 7-segment front panel LED shows PDU/Phase / Bank / Outlet ID
3 digit 7-segment front panel LED shows Current / Voltage / Power
Dissipation, IP address, and readings from up to 4 environment sensors
Safe shutdown support
Separate power for the unit's own power and its power outlets – the user
interface is still accessible even when an overload condition trips the
devices' circuit breaker
Dedicated 8/14-outlet bank for critical load devices (PE9 models only:
PE9216/PE9324 8 outlets; PE9222/PE9330 14 outlets) – always powered
on
Proactive overload protection (POP) (PE8 / PE9 models only) –
automatically powers off the last outlet that caused the current overload
(see Proactive Overload Protection (POP), page 7)
Remote Access
Remote power control via TCP/IP and a built in 10/100 Ethernet port
Network Protocols: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP,
NTP, DNS, auto sense, Ping
Remote users can monitor outlet status via web pages on their browsers
eco PDU Power Management software – eco Sensors
Supports SNMP Manager V3
Operation
Local and Remote power outlet control (On, Off, Power Cycle) by
individual outlets (PE8 / PE9 models)
Supports multiple power control methods – Wake on LAN, System after
AC Back, Kill the Power
Power-on sequencing – set the power on sequence and delay time for each
outlet to allow equipment to be powered on in the correct order
Easy setup and operation via a browser-based user interface
Multibrowser support (IE, Mozilla, Firefox, Chrome, Safari, Opera)