Filter
Top Products
eco PDU PE Series User Manual
29
Port and LED Panel (All models)
No. Item Description
1ID Section
The ID of the selected PDU/Phase / Bank / Outlet appears in
the LED display window.
When PDU/Phase LED is lit, the LED display window will
show P1.
When BANK LED is lit, use the Up and Down buttons to move
forward or backward through the following sequence: 01→02
(Bank1→Bank2)
When the Outlet LED is lit, use the Up and Down buttons to
move forward or backward through the outlets: 01→02→03→
... 01 (Outlet1→Outlet2→Outlet3→ ... Outlet1)
2 Readout
Section
When PDU/Phase / Bank / Outlet is selected, readouts for
Current, Voltage, Power, and IP address appear in the display
window.
Press the button next to the LED display window to cycle the
selection between the items; the LEDs next to the items
indicate which one the display relates to.
When a sensor is selected, the display shows temperature /
humidity / differential pressure according to the sensor type
3Status LEDs
Power: Lights when the unit is powered up and ready to
operate.
Door sensor: Lights Red when the door is open. See Door
Sensor, page 9, for details.
1 2 4
3
5
6 7