Filter
Top Products
Features
M Remote power on/off/reboot control for eight outlets via TCP/IP and a
built in 10/100 Ethernet port
M Daisy chain up to 15 additional stations to control up to 128 outlets
M Manual switching between Local and Remote access for each port via
front panel push button switches
M Individual control of each port - users can set the power on sequence and
delay time for each port to allow equipment to be turned on in the proper order
M Easy setup and operation via a browser interface
M Safe shutdown and rebooting for Windows systems*
M Overcurrent protection - protection and recovery for each AC port plus
total port overcurrent protection - remote users can monitor the current
status via the GUI on their browsers
M Separate circuits for the unit’s power and the power to the devices - the
power control status menu is still accessible even when an overload
condition trips the devices’ circuit breaker
M Cumulative load measurement - remote users can view load information in
amperes via the GUI on their browsers
M On/Off scheduling - allows everything from a one-time start/shutdown, to
daily, weekly, etc. starts/shutdowns at user-specified times
M Port grouping - perform the same action on a specified group of ports
M Two level (Administrator and User) security
M Detachable front panel for convenient rack mounting
* Safe shutdown and rebooting is supported if the Power Monitor utility has been installed (see
Automated Setup, p. 38).
2005-09-07
PN9108U User Manual
2