Filter
Top Products
- 12 -
Operation
The VS-0404 operates according to the following parameters:
For example, if you want the data from Input Port 2, to be output
to Output Port 4, press the switch that corresponds to Output Port
4 until the switch’s LED 2 lights to indicate that it is receiving data
from Input Port 2.
Each front panel pushbutton switch corresponds
to an output port on the VS-0404’s rear panel.
The switch is used to select the input source for
the data that will be sent to its corresponding
output port.
Press the switch to cycle from the currently
selected input port to the next one (1 to 2; 2 to 3;
3 to 4; 4 to 1) as many times as necessary to
arrive at the desired input port.
The built-in LEDs light to indicate which input
port is the selected one.
4
3
2
1
vs0404.fm Page 12 Friday, November 5, 2010 4:14 PM