Filter
Top Products
16
Scenario 2: A NetPower 302AV device wants to join an existing network
group BC. Device A wants to join a network group “BC” currently consisting of device
B and device C. Any devices within the “BC” group can become the “Broadcast State”
and device A will be the “Join State”.
Example:
Press the Sync Button of device A for more than 10 seconds to make sure
that it is detached completely from any possible network group.
Press the Sync Button of device B or C of the BC network group for 1~3
seconds to turn it into Broadcast State, you should find the Power LED
blinks steadily signifying it is in Broadcast state.
Press the Sync Button of device A for 1~3 seconds to turn it into Join
State, you should find the Power LED blinks steadily signifying it is in Join
state.
Wait for the devices to boot again and when the PLC LEDs of both devices
lit steadily, you will now have device A joined with the BC network group.
Scenario 3: A NetPower 302AV device A of network group AD wants to join
an existing network group BC. For a device which already belongs to a network
group is to join with a different network group, that device has to be ungrouped from
its current attached group first.
Example:
Press the Sync Button of device A for more than 10 seconds to ungroup it
from network group AD.
Then press the Sync Button of device (B or C) of network group BC for
1~3 seconds to turn it to Broadcast State, you should find the Power LED
blinks steadily signifying it is in Broadcast state.
Press the Sync Button of device A again for 1~3 seconds to turn it to Join
State, you should find the Power LED blinks steadily signifying it is in Join
state.
Wait for the Sync LED of both devices A and (B or C) lit steadily. Now you
will have device A join the network group BC.