Filter
Top Products
21
Password Setup Instructions:
This feature grants users the access level to change the Private Network Name of both
the local & the remote HomePlug devices. Password is required if one is to change the
Private Network Name of each devices within the powerline network in order for all
devices to be able to communicate & synchronize with each other within the network.
1. To enter a password for a specific device, select the device and click on
the Enter Password button at the bottom of the lower panel to call up
the Set Device Password dialog box.
2. Then type in the password in the blank provided and press OK.
3. If the password entered is not recognized or unacceptable, an error
message box will pop up prompting user to change the password. Click OK
then re-enter the password again. If the password entered is correct, you
will see that the password will be displayed next to the device.
The password of each HomePlug device can be found at the back of the
device