Filter
Top Products
ENGLISH
43
How to configure WEP security:
This function is used to protect wireless communication from
eavesdropping.
• Open System: with the same WEP key between the stations, the
stations don’t need to be authenticated, and this algorithm was set
to default. Please select WEP or 802.11x Settings in order to
complete the configuration.
• Shared Key: with the same WEP key between the stations in this
Authentication algorithm, this type will use packets with encryption
by transferring a challenge text which will be acknowledge by both
side of the stations. In order to choose which authentication
algorithm will be used, you must know which one the station
supports this algorithm first. Please select WEP or 802.11x
Settings in order to complete the configuration.
If you select 64bit in Hex format, you must type 10 values in the
following range (0~F, hexadecimal), or 64bit in ASCII format, you must
type 5 values in the following range (0~9, A~Z and a~z Alphanumeric).
If you select 128bit in Hex format, you must type 26 values (0~F,
hexadecimal), or 128bit in ASCII format, you must type 13 values in the
following range (0~9, A~Z and a~z Alphanumeric).
ASCII HEX
64 bit 5*X 10*Y
128 bit 13*X 26*Y
256bit 29*X 58*Y
X=[(0~9, A~Z, a~z Alphanumeric]
Y=[0~9, A~F Hexadecimal]
Be sure that the USB Adapter and the wireless station (AP) were set in
the same key.
5 Uninstallation (Windows ME/XP/2000)
To uninstall the Wireless USB Adapter:
• Select Start->All programs->Atlantis->NetFly U54 Wireless Utility and select
Uninstall.